Features of new high speed HF power system:
1. No resistances, low power consumption, save power 70%, saving using cost and environment-friendly.
2. No resistances, no much heat, low malfunction ratio of electric components inside of controller.
3. Max. cutting current up to 15A, Max. speed up to around 350mm2/min(note: without thinking about surface finish).Regular cutting current 6~8A, with cutting speed around 180mm2/min, it dep
ends on requirement of surface finish.
4. With regular cutting speed, wear of molybdenum wire is about 0.01mm after 500,000mm2 cutting, i.e. after install new wire of Φ0.18mm, diameter will be Φ17mm after job of cutting 500,000mm2.
5. PC/104 special for industrial purpose.
6. Interior double-impulse and multiple-circuit design, electrolytic protection during cutting.
7.Better surface finish, with high speed sampling and high speed logical circuit, the power of discharging is precisely controlled to increase surface finish.
8. No limitation of cutting height,from 1mm to 1500mm, the working solution won't get too dirty when workpiece is too high, to cause no discharging when cut high workpiece.
9. Blue spark, interior high speed signal filtering function, isolate and adjust to avoid electric arcing during cutting.
10. Protection of wire burning, high speed cutting protection.
Please check a demonstration video on youtube.
https://youtu.be/DW_Yec8bWug
The economical type wire cutting EDM DK7732 is unique and original from China; it is widely used in mold, accurate components industry. DK7732 uses molybdenum wire as electrode wire. This type wire cut EDM is different from brass wire cut EDM which is widely known in the world. Molybdenum wire type wire cut EDM is much cheaper than brass wire cut EDM, and can replace many jobs of latter one. Kingred's economical type wire cut EDM machine is featured:
1) Adopt KDXP(AutoCUT) CAD/CAM software, Windows XP as operating system, easy to use and maintain;
2) use Resin sand casting technology make casting of DK77 series, twice High temperature tempering treatment to remove inner stress to reduce possibility of deformation;
3) digitalized electrical circuits that controlled by inverter, to realize smooth motion of wire feeding;
4) large thickness and high efficiency high frequency power source;
5) adjustable feed speed of wire drum, low speed for loading wire and high speed for machining. DK7732 has table travel 320×400mm, it is suitable to cut all kinds of conductive material, if you are looking for a small and cheap wire cut EDM, DK7732 would be your perfect choice.
| Item |
Unit |
DK7732 |
| Travel of X/Y |
mm |
320×400 |
| Table size |
mm |
415×635 |
| Max. cut thickness |
mm |
300 or 500 |
| Cut taper/thickness |
°/mm |
±3° or ±30°/100 |
| Wire frame |
|
Adjustable |
| Cut accuracy |
mm |
≤0.015 |
| Best finish of once cut |
Ra ≤ μm |
≤2.5 |
| Best finish of multi-cutting |
Ra ≤ μm |
≤1.2 |
| Wire diameter |
mm |
Φ0.12-0.25 |
| Max. electrical current |
A |
6 |
| Power |
Kw |
2 |
| Voltage |
V/Hz |
3 phase 380V/50Hz or 220V/60Hz or 415V/50Hz |
| Max load of table |
kg |
400 |
| Weight of machine |
kg |
1700 |
| Dimension (L×W×H) |
mm |
1500×1200×1600 |
Main function of AutoCUT:
1. Support graph drive automatic programming, there is no need for customers to touch codes, only need to set cutting technology to the graph for cutting; at the same time, it support 3B or G code list created by other wire cut EDM software, and simply read and process to do cutting.
2. Software is embedded in AutoCAD, CAXA and some other software, customers just need to know AutoCAD or other design software, easy to use and no need for special training of drawing.
3. Several machining pattern combined together in cutting(continuous, single segment, forward, backward, trace back and so on.).
4. XYUV four axes direction change is adjustable, drive motor could be set as 5 phase 10 beats or 3 phase 5 beats and so on.
5. Real time monitoring upon X, Y, U.V and cutting situation.
6. Machining preview, real time display of cutting process; 3D display and tracking of taper machining, zoom in and zoom out to view graph, front view, right view, top view and etc..
7. Capability of multi-time cutting with customer maintained data base of cutting parameters, make multi-time cutting much more easy and reliable.
8. Taping cutting adopts 4 axes simultaneous technology, can process up and down different shape cutting convenient.
9. Control board to drive 4 axes movement, work stably and reliably.
10. Support several cards work together in parallel , several wire cut EDM machine could be controlled by only one computer and do cutting at the same time.
11. With automatic alarm function, it will alarm when cutting is done or malfunction happens, time of alarming is settable.
12. Support angle clear time-delay, time delay when cutting angle of track, to make avoid impact of deviation caused by molybdenum wire.
13. Support compensation of teeth gap of screw to increase mechanical accuracy.
14. Support linear scale and closed- type with servo motors to increasing positioning accuracy of machine.
15. Support three different cutting pattern: normal high speed wire cut EDM machining, medium speed wire cut EDM coding output pattern and output pattern.
16. Power off memory function, cutting data backup after recover of power supply, re-track when short circuit happens and malfunction handling.
17. Automatic power off after machining is done.
Main features of AutoCUT system
1. It adopts graph drive technology, reduce work of man and increase working efficiency, and minimize error caused by workers.
2. Open to various version of WindowsXP, software is easy to learn and use.
3. Directly embedded in AutoCAD, CAXA and may other CAD software, to realize CAC/CAM combined smoothly to prolong cutting range.
4. Taper cutting; 4 axes simultaneous technology; 3D design and cutting track; compensation to diameter of guide, diameter of electrode wire, and big tap cutting.
5. Multi-cards work simultaneously is supported. It is possible to control many wire cut EDM machines with only one set computer, which has many pieces AutoCUt PCI card.
6. It has data base of cutting parameters which is editable by operators, who can save, edit and read cutting parameters according to different material, different thickness and different needed cutting performance.
7. AutoCUT can optimize processing of super thick workpiece(up to 1000mm) cutting, to make track stable and reliable.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}